Double Glazed Window Repair
Double glazing is a great investment in energy efficiency. It prevents heat loss during the winter months and keeps your home cool during summer. The ability to have your double-glazed windows fixed when they need to is a great method to ensure they are operating properly.
Over time condensation and misting may affect your double-glazed windows. This can cause your double glazed windows to be difficult to open or shut.
Broken Panes
A stray ball or a stray pebble from your lawnmowers or even a storm that is heavy could break the double panes of your windows, leaving your home exposed to the elements. While a damaged glass window is difficult to repair, it doesn't need to be replaced. The insulated glass that is between two glass panes is still in good shape So you can repair your double-paned windows yourself.
To begin, you'll need remove the broken glass from the frame. Be careful to keep glass shards from falling to the floor or slipping off the frame. Wear work gloves to protect your hands, and place a rag to cover the broken glass to avoid any further injury or cuts. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or other debris. Sand rough areas of the window frame to create a smooth surface on which to install your new window.
After the frame has been cleaned and dried, you can apply a fresh layer of glazing to the seam in which the broken pane was removed. This is the best way to ensure your window stays secure and sealed and will aid in reducing energy costs by keeping water and drafts from entering your home. Next, you will need to select your glazing material. There are a variety of options, including clear tape, which is a bit more durable than regular tape and will help keep your window secure from further cracking, and glazing film that resembles clear plastic wrap. This type of wrap has the advantage that it can be painted to match your frame and will also block out rain and ice.
No matter what material you use it's essential to press the glaziers points into the gap where the putty meets your frame. These will hold the newly-formed glass in place and help it to adhere to the frame. Glazier's points can be found in hardware stores, and are available in pre-made ropes that you simply roll onto the frame rabbets.
Condensation
Double glazing is susceptible to condensation issues. If you encounter this issue, it is recommended to contact the company that installed the window. Many companies offer warranties and guarantees that cover the problems. Condensation and fogging between panes of glass is a clear sign that the seals between your windows are damaged and can only be repaired by a professional who will repair both panes.
The process is difficult and requires special tools to take off the old one and replace the new one, but it can be done by an expert who will provide the required equipment. Utilizing these tools could be dangerous, however, so it is always recommended to leave this kind task to an expert.
Wear safety gloves and glasses if choose to do it yourself. You may be exposed to flying glass fragments. It is also crucial to remove all putty and metal glazing points from the grooves where the new window will be. You will also want to brush the frame with wire, and then vacuum or wipe with a damp cloth. After the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Make sure the glass fits into the grooves.
Based on the frame you have You will then have to apply the caulk to the grooves in order to ensure that your new pane is secured in position. Once the caulk has dried and is dry, you must smooth it out and make any needed adjustments. The wood molding can be put back in place.
Double-glazed windows can be difficult to open and close in the event of extreme weather. Extreme temperatures can cause frames to expand or shrink and cause them to slide or become stuck. You can try wiping down the frames with water and then lubricating them when this happens however it is better to consult the company that installed your windows.
Misted
Misted Double Glazing is a problem with windows that is caused by moisture getting trapped between the glass panes of your double-glazed windows. Double glazing consists of two panes which are separated by a space filled with argon to improve thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside, allowing you to keep your temperature at a comfortable level in your home.
Over time however, this seal can break down and moisture can begin to build up between the window panes, which causes them to become cloudy. This occurs because the sun's rays heat the space between the window panes, which causes the water to evaporate.
This is a normal occurrence however, if it occurs between the window panes, it can cause a problem as it is no longer able to control the temperature in the room and allow the outside temperature to affect the indoor temperature. If you notice your double-glazed windows have become misty, call in the experts at Northfield Glass to investigate.
We can repair the individual blown sealed unit without needing to replace the whole window which is less disruptive than a total replacement. Our misty window repair involves taking off the glass, cleaning it, then replacing it with a fresh one to create a watertight seal again.
There are companies within the industry who claim to drill holes in your windows with mist and inject chemicals into them which they claim will eliminate the condensation and fog however, we do not recommend this procedure. This is not only unsightly, but it could also damage the toughened glass and result in windows that don't completely perform its function.
If you don't take care to fix the issue immediately it could result in mould, which could not only harm the window, but could also pose health risks to your loved ones. The condensation in the window could cause other issues within your home such as damp or rot. In some cases windows, they may have to be replaced completely.
Blown or failed
Double-glazed windows consist of two panes of glass with an air or inert between them. This helps to improve their thermal efficiency, allowing heat in and cold out. As time passes the gas will become depressurised and cause many problems.
One of the most common is condensation between the panes. It's not a sign of a window failing, but it could be a sign you should replace the windows. Condensation could be an indication that your double glazing is damaged, in which case it will need to be replaced completely.
You should also look out for drafts coming through your double-glazed windows. window repair near me could be due to a failure of the seal or a damaged handle or lock. A draught can be quite noticeable and will lead to higher heating bills, so it is important that you get this fixed sooner rather than later. You can test the seals by rubbing around the edges of your window frame to determine whether you feel cold air.
Another sign that your window seals are failing is when you begin to see water dripping on the inside of your windows. This is a good indicator that you will need to seal your double-glazed windows.
Your window frames are made to move slightly, as they need to do in order to keep the glass sheets in place. However, with time, this special packaging material can get compacted, and this could cause the seal to break. This will allow the air to flow between the panes, reducing the efficiency of your window's energy consumption.
A seal that is blown is a clear indication that your double glazing is damaged and should be repaired immediately. A blown seal stops your double glazing from performing its primary function, which is to keep the cold out and warm air in. Furthermore, a blow-off seal will let your home's moisture in, which could cause mold and other uncomfortable conditions. Call a double glazing specialist when you notice a blown window seal. They can replace the entire unit.
